Click on any photo or item number to see the full listing with photos etc.
Bell pull #BP106
These bells are all
Danish and made prior to 1940. They are all in working condition, solid brass
To attach the bell to the top hanger, just take the little hook and press around the top hanger hole of the hardware. I often use needlenose pliers very gently to do this.
The bells are all solid cast brass and in working order, Danish c. 1900-1940
If you buy a bell, here is how to put it on your pull. Click on a photo to see an enlargement:
The little hook at the end of the spring on the bell piece goes into the top of the needlepoint pull hardware. Use a plier and a piece of papertowel to protect the brass and gently close the hook around the loop in the needlepoint pull hardware. Put a nail in the wall and hang the bell with the attached pull That's it!
Click on any photo to see an enlargement.
#21.For up to a 6" bell pull
#19. For up to a 5 1/2" bell pull
Bell Pull Bell Hooks...These special little hooks are a wonderful touch with your needlepoint bell pull. Available only with the purchase of hardware, a bell pull or bell from this site. I need to check to be sure that the hook will fit into the hardware or bell for you.